Archive for ronhks

Docker img ipv6 problem

On my host the ipv6 is disabled. I had to start a docker image, which would like to use ipv6.

This conflict provides this error message:

Error response from daemon: driver failed programming external connectivity on endpoint CONTAINER_NAME(HASH): Error starting userland proxy: listen tcp6 [::]:PORT_NUMBER: socket: address family not supported by protocol

The resolution, to define the IP address in port mapping (for DHCP, with global definition):

docker run -p 0.0.0.0:HOST_PORT:CONTAINER_PORT

Or in docker-compose.yml like this:

version: "3.9"
services:
  SERVICE_NAME:
    image: IMG
    container_name: CONTAINER_NAME
    ports:
      - "0.0.0.0:HOST_PORT:CONTAINER_PORT"

Gentoo USB serial passthrough KVM

I have a Conbee II Zigbee receiver. After a restart the USB passthrought stopped working (on the guest VM I always get errors like:

usb 2-2: new low-speed USB device number 25 using uhci_hcd
usb 2-2: Invalid ep0 maxpacket: 64 usb
usb2-port2: unable to enumerate USB device

So I decided, passthrough the USB serial. It’s a little tricky 🙂

    <serial type='dev'>
      <source path='/dev/ttyACM0'/>
      <target type='isa-serial' port='1'>
        <model name='isa-serial'/>
      </target>
    </serial>

The trick is the serial type because it is dev.

src: http://baitisj.blogspot.com/2021/02/serial-device-passthrough-from-linux.html

ConBee 2 firmware upgrade on Ubuntu

Requirements:

Installed Deconz software. Downloadable, here: http://deconz.dresden-elektronik.de/ubuntu/stable/

Download the lates firmware from here:

http://deconz.dresden-elektronik.de/deconz-firmware/?C=M;O=D
(deCONZ_ConBeeII_0x)

Stop all services:

$ sudo systemctl stop deconz && sudo systemctl stop deconz-gui

Stop ModemManager if it is installed:

$ sudo systemctl stop ModemManager

Update the firmware:

sudo GCFFlasher_internal -t 60 -d /dev/ttyACM0 -f <LOCATION_OF_THE FIRMWARE_IMG>/deCONZ_ConBeeII_0x1234567.bin.GCF

src: https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Update-deCONZ-manually

Unuable Remmina with squares as characters

I use Ubuntu 20.04 and sometime remmina makes me a joke….

If you start remmina, and you see like this:

remmina uses squares like on that pics

Try this:

rm -rf ~/.cache/fontconfig && sudo fc-cache -r -v

Acutally, it resolves me the problem.

Hassio with supervisor on Gentoo by docker

Supervisor, first start

Docker pull:

docker pull homeassistant/qemux86-64-homeassistant:landingpage

Than, start it:

docker run -d --name hassio_supervisor \
--privileged \
--security-opt apparmor:unconfined \
--security-opt seccomp=unconfined \
-v /run/docker.sock:/run/docker.sock \
-v /run/dbus:/run/dbus \
-v "/opt/hassio/data":/data \
-e SUPERVISOR_SHARE="/opt/hassio/data" \
-e SUPERVISOR_NAME=hassio_supervisor \
-e HOMEASSISTANT_REPOSITORY="homeassistant/qemux86-64-homeassistant" \
homeassistant/amd64-hassio-supervisor:224

Linux Desktop experiences

DRAFT

A long-long years ago (til 2007) I used linux as desktop (Gentoo exactly).

After, the windows 7 and the 10 also will be a very-very good PC OSs.

BUT I tried the Ubuntu 20.04, and it seems work wine from 1 month at my 2in1 PC with WWAN card (DELL 7390).

I would like to collect some useful programs which I found very userful, fast and maintined (actually).

Program typeLinux programWindows alternative
(what I liked to use)
Screenshot maker and editorFlameshotGreenshot
Clipboard managerCopyQDitto
LauncherULauncherLaunchy
File managerDouble CommanderTotal Commander
SSH session managerRemminaKitty
VNC session managerRemminaUltraVNC
RDP session managerRemminaRDCman (discontinued)

mdadm raid 5 all disk became spare

After an irregular restart, the raid 5 array became unreachable. D’oh!

# cat /proc/mdstat

$ cat /proc/mdstat 
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] 
md3 : inactive sdd3[3](S) sde3[4](S) sdf3[6](S) sdg3[5](S)
      6546850144 blocks super 1.2

As you can see all sd[cdefg]2 partitions are (S)pare.

First, we had to stop the array:

# mdadm --stop /dev/md3

and after we have to reassamle the array:

# mdadm --assemble /dev/md3 /dev/sdc3 /dev/sdd3 /dev/sde3 /dev/sdf3 /dev/sdg3 --verbose

After, we have to see like this:

$ mdadm --assemble /dev/md3 /dev/sdc3 /dev/sdd3 /dev/sde3 /dev/sdf3 /dev/sdg3 --verbose
mdadm: looking for devices for /dev/md3
mdadm: Fail create md3 when using /sys/module/md_mod/parameters/new_array
mdadm: /dev/sdc3 is identified as a member of /dev/md3, slot 0.
mdadm: /dev/sdd3 is identified as a member of /dev/md3, slot 2.
mdadm: /dev/sde3 is identified as a member of /dev/md3, slot 3.
mdadm: /dev/sdf3 is identified as a member of /dev/md3, slot -1.
mdadm: /dev/sdg3 is identified as a member of /dev/md3, slot 1.
mdadm: added /dev/sdg3 to /dev/md3 as 1
mdadm: added /dev/sdd3 to /dev/md3 as 2
mdadm: added /dev/sde3 to /dev/md3 as 3
mdadm: added /dev/sdf3 to /dev/md3 as -1
mdadm: added /dev/sdc3 to /dev/md3 as 0
mdadm: /dev/md3 has been started with 4 drives and 1 spare.

cool part of it:

mdadm: /dev/md3 has been started with 4 drives and 1 spare.

let’s check the result:

$ cat /proc/mdstat 
Personalities : [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] 
md3 : active raid5 sdc3[0] sdf3[6](S) sde3[4] sdd3[3] sdg3[5]
      4910137344 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU]
      bitmap: 0/13 pages [0KB], 65536KB chunk

And it done, huh 🙂

Move “Show Applications” right to left of the Dock in Ubuntu

When I installed new Ubuntu 18.04, first thing I have my mind is to move the Dock at botton. I was very happy to see that Ubuntu 18.04 is already provided that option, to enable this you need to go to setting > Dock and then “Position of screen” to bottom.

Yessss, it works.

Image for post

After this one more thing I noticed is “Show applications” is showing at the right side of the Dock but I like it on the left (Event in old versions and mac/ windows its in left). I tried to search in google but nothing found so I thought of writing a notes about it. And finally, I got it working so I thought it will be good to share it with everyone.

Here is the command you need to run for this

gsettings set org.gnome.shell.extensions.dash-to-dock show-apps-at-top true

Yayyy, its working.

1*AbDjQvjx30Du4QBoNrHegg.png (700×31)

And of course, to back set it false:

gsettings set org.gnome.shell.extensions.dash-to-dock show-apps-at-top false

src: https://medium.com/@suneel.omrey/move-show-applications-right-to-left-of-the-dock-in-ubuntu-18-04-9592dfd18c9a

Win 10 set default editor

1. Start the registry editor (regedit.exe) and select HKEY_CLASSES_ROOT.

2. Press Ctrl + F to open the Find dialog.

Image

3. Type systemfileassociations, enable “Keys” and deselect “Values” and “Data” check boxes.

4. Press ENTER.

You’ll now be taken to the HKEY_CLASSES_ROOT\SystemFileAssociations branch.

Expand the “SystemFileAssociations” branch by double-clicking on it
Scroll down until you see a subkey named “image”
Double-click “image”

Double-click “shell”

Double-click “edit”

Double-click “command”

src: https://answers.microsoft.com/en-us/windows/forum/windows_10-files-winpc/change-default-image-editor/4b01b777-338f-49c1-8300-9bcd7f60c160

IDEA linux – import module hanging

I tried IDEA on linux. OF course, It started with gooling 😀

I tried to import the modules, but hanged… (on a freshly created project, with import maven modules)

 

The resolution was:

File -> invalidate caches and restart

src: https://stackoverflow.com/questions/47626478/intellij-idea-stucked-on-loading-project-screen